Top Selling Products
- Minimum quantity should 5 of "D.392.016.F.FG"
-
DSM1-S5
Diamond strip for monolateral treatment.
1 side Metal diamond set.1X L or R DMS-0.1, 0.2, 0.3 2X RPS-15.
Pack of 5
-
DSPK2-1Y
DentaSonic has developed the only non-invasive conceptual system for the controlled and safe correction of enamel.
Below are our recommendations and advice on how to proceed to carry out a safe, controlled, comfortable, and non-invasive treatment, aimed at preserving your patient‘s enamel as much as possible and guaranteeing a perfect final result.Follow your Set-Up (protocol), avoiding to reduce over the necessary. All this is always under your total control also thanks to the DentaSonic system.
Developed for use with Invisalign, ClearCorrect, eCligner, Inman Aligner, Six Month Smiles, EON Smile, BestSmile and other orthodontic treatments.
Reason why we give them a new definition. We call them NI-IPC! Non-invasive Interproximal Enamel Correction.
Avoiding any over reduction, saving patient enamel! That’s are our priority at all.
-
DSRFK1-2Y
The ultimative Restoration finishing Kit confectioned in a box with a complete range of Resin DiaStrip for the monolateral controlled non invasive proximal finishing & polishing in restoration, and veneers and overhangs removing.
Water cooled oscillating handpiece with a 4:1 ratio, and light, in addition also a 2nd. reciprocating headContent:
- 3x RDS-008L, 3X RDS-0.09L, 3X RDS-0.10L, DSM-0.012L
- 2x DSS1, 4X RPS-15
- 1x DSG-204 Twist water-cooling HP, with or without light, 4:1, stroke 1,1mm 1x DSH-10 reciprocating Head
- 2x DB-R20 Cup, 2x DB-R21 Point, Debonding polishers
- 1x ST-5, Stainless steel SteryStrip Holder
- 1 extraction tip + 1 Spray nozzle
- 3x CS-60-40, 3x CS-20-7, Finishing CombiStrip
- 1x HP Instruction booklet, 1x Worldwide Warranty, 1x Leaflet 1x IFU, Instructions for use.
-
DSS-005L
Diamond Saw, Single Side (Left) open contact point, safe the gum. 0.05mm
Pack of 5 -
DSS-005L-12
Diamond Saw, Single Side (Left) open contact point, safe the gum. 0.05mm
Pack of 12 -
DSS-005R
Diamond Saw, Single Side (Right) open contact point, safe the gum. 0.05mm
Pack of 5 -
DSS-005R-12
Diamond Saw, Single Side (Right) open contact point, safe the gum. 0.05mm
Pack of 12 -
-
-
-
-
DSS-1
No diamond coating, saw for opening bonding contact point
Thin Metal saw (no diamond coating).Pack of 5
-
DSS-1-12
No diamond coating, saw for opening bonding contact point
Thin Metal saw (no diamond coating).Pack of 12
-
DSS-S12
Metal Saw Diamond coated 2 sides.
1X DSS-0.05L/R, 4X 0.1, 2X 0.2, 2X RPS-15, 9
Pack of 12
-
-
FD-S1
Discs on resin for finishing / Polishing
1 side Resin Aluminium oxide coated. 3x150mm
FlexiDisc Set 60, 40, 20, 7 micron. 25 pcs each -
KDSC1
Edenta Double Sided IPR Diamond Strips 0.1mm Yellow
For interproximal enamel reduction (IPR), also referred to as “stripping” or “recontouring”. IPR is a technique in .which part of the enamel layer is removed to create sufficient space for orthodontic alignment.
Diamond-coated on both sides, the diamond finishing strips enable simple and precise reduction of the interproximal tooth substance. The flexible strips follow the natural contours of the teeth to provide optimal surface design.The diamond finishing strip has a thicknesses: 0,1 mm. Colour coding; yellow
The stainless steel strips can be autoclaved and reused.
Sold in a pack of 5 strips.
-
KDSF2
Edenta Double Sided IPR Diamond Strips Red 0.2mm
For interproximal enamel reduction (IPR), also referred to as “stripping” or “recontouring”. IPR is a technique in .which part of the enamel layer is removed to create sufficient space for orthodontic alignment.
Diamond-coated on both sides, the diamond finishing strips enable simple and precise reduction of the interproximal tooth substance. The flexible strips follow the natural contours of the teeth to provide optimal surface design.The diamond finishing strip has a thicknesses: 0,2MM Colour coding; Red
The stainless steel strips can be autoclaved and reused.
Sold in a pack of 5 strips.
-
KDSF3
Edenta Double Sided IPR Diamond Strips Red (Fine Grit) 0.3mm
For interproximal enamel reduction (IPR), also referred to as “stripping” or “recontouring”. IPR is a technique in .which part of the enamel layer is removed to create sufficient space for orthodontic alignment.
Diamond-coated on both sides, the diamond finishing strips enable simple and precise reduction of the interproximal tooth substance. The flexible strips follow the natural contours of the teeth to provide optimal surface design.The diamond finishing strip has a thicknesses: 0,3MM Colour coding; Red
The stainless steel strips can be autoclaved and reused.
Sold in a pack of 5 strips.
-
KDSM3
Edenta Double Sided IPR Diamond Strips Blue 0.3mm
For interproximal enamel reduction (IPR), also referred to as “stripping” or “recontouring”. IPR is a technique in .which part of the enamel layer is removed to create sufficient space for orthodontic alignment.
Diamond-coated on both sides, the diamond finishing strips enable simple and precise reduction of the interproximal tooth substance. The flexible strips follow the natural contours of the teeth to provide optimal surface design.The diamond finishing strip has a thicknesses: 0,3MM Colour coding; Blue
The stainless steel strips can be autoclaved and reused.
Sold in a pack of 5 strips.
-
MG-6
Measuring gauge
Stainless steel gauge with 6 different thicknesses:
0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm -
-
RDS-008L-12
Diamond strip on resin for finishing and polishing.
1 side resin diamond strip. Left
0.08mmPack of 12
