DSPK2-1Y
DentaSonic has developed the only non-invasive conceptual system for the controlled and safe correction of enamel.
Below are our recommendations and advice on how to proceed to carry out a safe, controlled, comfortable, and non-invasive treatment, aimed at preserving your patient‘s enamel as much as possible and guaranteeing a perfect final result.
Follow your Set-Up (protocol), avoiding to reduce over the necessary. All this is always under your total control also thanks to the DentaSonic system.
Developed for use with Invisalign, ClearCorrect, eCligner, Inman Aligner, Six Month Smiles, EON Smile, BestSmile and other orthodontic treatments.
Reason why we give them a new definition. We call them NI-IPC! Non-invasive Interproximal Enamel Correction.
Avoiding any over reduction, saving patient enamel! That’s are our priority at all.
Description
DentaSonic SA Professional Kit – Without Light
DentaSonic SA The ultimate Professional Kit with a complete range of DiaStrip for the bilateral and monolateral controlled non-invasive IPC (approximal correction) of the tooth size and the proximal finishing & polishing in orthodontics, aligners, and/or restorative.
Water cooled oscillating handpiece with a 4:1 ratio, in addition also a 2nd. oscillating head, and one measuring gauge with 6 thicknesses.
Benefits
• Efficient, safe, gentle, and agreeable opening of the interdental contact points
• Rapid and controlled reduction of the enamel
• Proximal contouring, finishing and polishing of both adjacent teeth in a single procedure with special flexible resin diamond
coated strips
Kit contents
Ref.: DSPK2-1Y
1x DSS-01, DSS-02, DSM-03, DSM-04, RDS-04, RDS-05mm 2 sides
1x DSS-005, DSM-01, DSM-02, DSM-03, RDS-009L, RDS-010Lmm 1 side
3x RPS-9, 3X RPS-15
1x DSG-204 Twist water-cooling HP, 4:1, STROKE 0.9mm
1x DSH-10 reciprocating Head, + maintenance voucher
2x DB-R20 Cup, 2x DB-R21 Point, Debonding polishers
1x MG-6, Measuring gauge with 6 thicknesses: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5mm
1x ST-5, Stainless steel SteryStrip Holder
1x MG-1 extraction tip + 1x SN-1 Spray nozzle, 1x WN-1 water hole needle
2x CS-60-40, 1x CS-20-7, Finishing CombiStrip
1x HP Instruction booklet, 1x Worldwide Warranty, 1x Leaflet
1x IFU, Instructions for use.
Content of the items inside the starter kit can change without prior notice.
COMPLETE WITH 1 YEAR WARRANTY
General Enquiries
There are no enquiries yet.
